Birthday Cake Set with LED Candles & Matches

Designer

3DPmom

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Other

Først set

2026-07-15 09:49

Sidst set

2026-07-15 09:49

Tags

birthday birthday cake cake Party candle light LED magnets push click matches matchbox pass through cake stand plate 3dpmom

Beskrivelse

Happy Birthday! Happy Anniversary! Happy Tuesday! 🎉 Whatever the occasion, you will need this Cake Set to properly celebrate 😊 Fun features in this set include: Candles that light up (turn on and off) with magnetic matches Cake slices with a center that allows you to insert a candle and then take it out A candle box that spins the candles into place A cake stand with magnets to help hold the cake slices in place Boost Me (for free) If you like this model, please give it a boost 🚀 Thanks so much!! Erin Boost Please note you will need to purchase the following components: (5) Single White LED Magnetic Control Switch Lights (Warm) https://us.store.bambulab.com/products/single-led-magnetic-control-switch-light?id=42865579753608 (5) 1.4 x 16mm Rubber Bands (RA001) https://us.store.bambulab.com/products/rubber-bands?id=42614449766536 (10) 8x3 Neodymium Magnets (5 for the cake stand + 1 per cake slice(x 5 slices) = 10) https://us.store.bambulab.com/products/round-magnet?id=42424856510600 (If these are out of stock in Maker Supply they can also be purchased here: https://amzn.to/4u7ck2l ) NOTE: you will also need (2) 8x2 neodymium magnets BUT each LED light comes with a 8x2mm magnet so you do not need to purchase these separately. PLA Basic or Matte works great 0.2mm layer height (except for candle_body and candle_flame need 0.16mm layer height) 15% Infill Supports and brims needed on some parts (see detailed directions below👇🏼) This is a large collection that I have divided into two separate 3mf project files: Birthday Cake, Stand, Plate and Serving Spatula 3mf: Plate #1 (Cake Slice_body): 1 color, supports added Plate #2 (Top & Bottom Frosting, Pins): 1 color Plate #3 (Layer Covers):1 color, supports added Plate #4 (Piston, Bowtie Latch and Peg): 1 color Specific adjustments for piston: line width outer wall 0.6mm line width inner wall 0.6mm outer wall speed 50 mm/s inner wall speed 100mm/s supports added Important: DO NOT CHANGE ITS POSITION ON THE PRINT PLATE - It needs to print on its side so it moves smoothly within the chamber when assembled. If you position it to print in an upright position, the resulting layer lines will rub against the layer lines of the inside of the chamber causing more friction and noise (aka more difficult to move up and down and it’ll be extra noisy). Plate #5 (Chamber for Piston): 1 color supports added “pause print” added at layer 19 (layer height 3.8mm) to insert 8x3mm magnet (after magnet is inserted resume the print) Plate #6 (Cake Stand): 1 color line width outer wall 0.6mm line width inner wall 0.6mm order of walls inner/outer/inner “pause print” added at layer 19 (layer height 3.8mm) to insert 8x3mm magnets (after magnets are inserted resume the print) Plate #7 (Plate): 1 color Plate #8 (Serving Spatula): 1 color, supports settings adjusted to improve ‘scarring’ of supports once removed (to make the handle smoother) Birthday Candles, Candle Box, Matches and Matchbox 3mf: Plate #1 (Candle_body x 5): 1 color, layer height 0.16mm, Arachne wall generator selected ‘on’ Plate #2 (Candle_body x 5): 2 colors (stripes), layer height 0.16mm, Arachne wall generator selected ‘on’ Plate #3 (Candle Flames):1 color, 0.16mm layer height, Arachne wall generator selected ‘on’ Plate #4 (Candle Box_lid): 3 colors, brim ears added to corners Plate #5 (Candle Box): 1 color, wall generator Arachne selected ‘on’ Plate #6 (Match_tips): 1 color pause print added at layer 23 (layer height 4.6mm) to insert 8x2mm magnet into each tip (after magnets are inserted resume the print) Plate #7 (Match_sticks): 1 color, supports added Plate #8 (Matchbox_tray): 1 color, brim ears added to corners Plate #9 (Matchbox_cover): 1 color, inner and outer brim added Note: There is a magnet at the bottom of each assembled Cake Slice and corresponding magnets in the Cake Stand. I added the magnets to keep the cake in place. I designed the Cake Stand with a flat surface so a spatula could slide under and pick up the slices easily BUT I f