Wall Clock Wanduhr Fur Uhrenkomponenten Kit 011

Designer

cP3D

Designer relation

Ingen

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-14 16:37

Sidst set

2026-09-15 20:28

Tags

clock kit 011 kit011

Beskrivelse

https://makerworld.com/en/collections/4639439-licensed-models You may sell this model, and all models in the above link, with a Patreon membership www.patreon.com/cP_3D I endeavoured to craft a clock face for the Clock Component Kit 011 (including hands and wall mount), perhaps someone will find joy in reproducing it I utilised a radio clock movement from Amazon, dimensionally congruent with Bambulab's Kit 011 https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&th=1 To utilise the dial as an STL file for printing, ensure you expand the central aperture to 8mm in your slicer, as scaling necessitates this adjustment For 3MF users… scaling should be unproblematic 😉 I've incorporated a new print profile featuring a set of novel clock hands The second hand presents a significant printing challenge I recommend using this profile Should you require differently sized hands, please contact me I will adjust them accordingly and establish a new profile (different clock movements possess varying hand-holder diameters) Clock hands for other quartz clock movements are available here: https://makerworld.com/en/models/540231#profileId-457599 My other dials are collated here https://makerworld.com/en/collections/1715414 I once attempted creating a clock face for the Clock Component Kit 011 (including hands and wall mount); perhaps someone will enjoy reprinting it I employed a radio clock movement from Amazon, dimensionally identical to Bambulab's Kit 011 https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&th=1 Those utilising the dial as an STL file for printing should note the need to enlarge the central hole to 8mm in their slicer, a consequence of scaling For 3MF users… scaling is likely straightforward 😉 I've included a new print profile with a set of new clock hands The second hand proves particularly challenging to print; I recommend using this profile If alternative hand sizes are needed, please contact me; adjustments will be made and a new profile created (other clock mechanisms have different hand-holder diameters) Here is an image of the new hands: The following models are available here: