Longer Tiktok Gravity Knife Various Styles Chang K

Designer

bubujiaoqv

Designer relation

Ingen

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-14 16:37

Sidst set

2026-07-14 16:37

Tags

gravity knife fidget toy Vegetable knife knife toy print in place TikTok

Beskrivelse

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop. Thank you to everyone who provided me with the photos. Boost Me (for free) Boost No assembly instructions can be released at this time. Could not pass review. The original design has been extended, and certain details have been modified to facilitate support-free printing, eliminating the need for metal components. If desired, a small amount of adhesive can be applied to the baseplate. The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required.If necessary, apply some glue to the plate. 2024/3/19: A blade has been introduced, modeled after the Microtech knife design. It can be directly substituted for the original blade. The tip of the knife is sharp; please exercise caution. A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety. 2024/3/31: Many users have expressed a desire for shorter styles. I have re-uploaded the 75cm version. Many people want short styles. I re-uploaded the 75cm version. 2024/4/7: I have crafted a comb variant. I made a comb version. The hilt has been redesigned to incorporate lanyard holes, and non-manifold errors have been rectified. Reworked the hilt with lanyard holes and fixed non-manifold bugs. The pin set dimensions have been slightly increased and are included in the source file as ‘pin set V2.stl.’ If it remains too loose, a small amount of adhesive can be applied. Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue. Please be sure to comply with your local laws and do not use the model for inappropriate purposes. Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models. Reminder: Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove. The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength). Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti. It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances. Boost Me (for free) Boost