3D Printed Original Wheeled Small Stool

Designer

jindouyun

Designer relation

Ingen

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-14 16:37

Sidst set

2026-07-14 16:37

Tags

Small stool stool Wheeled Stool pulley stool

Beskrivelse

In the studio, I occasionally need to squat down to assemble things, which feels very strenuous, so I designed a 3D printed wheeled stool for easy movement and labor-saving operation. The stool surface is reinforced internally with a 3mm official bamboo board, which takes about 5 minutes to laser cut. The stool surface is designed with a cross-grid anti-slip pattern. It is recommended to use TPU-AMS for its anti-slip and flexibility. Of course, you can also change to PETG-HF and print directly, retaining the grid pattern You need to buy 4 wheels, the dimensions are marked as shown in the figure below, any that match can be used, attached is the link to the version I purchased,Taobao shop address, Model: black and white snap ring version 4 pieces Design supplement notes: 1. Someone asked why the wheel fixation requires an additional disassembled part. The reason is that everyone's printing accuracy may not be the same. If the entire base needed to be reprinted just for fine-tuning small hole dimensions, it would obviously be too wasteful and unreasonable, so I designed the wheel fixations as four independent small detachable parts. In case the wheels don't fit or are too large after printing, corrections can be quickly made by compensating for the holes in the slicing software;