WMP MP5 SD2

Designer

3DFreeman

Designer relation

Ingen

Kategori

Electronics & Digital > Video Games & VR

Licens

Creative Commons Attribution NonCommercial Creative Commons Attribution - NonCommercial

$ ↺

Attribution påkrævet; kommerciel brug er ikke tilladt.

Designer commercial

None

Først set

2026-07-14 10:17

Sidst set

2026-07-16 20:35

Tags

Ingen tags fundet

Beskrivelse

Update 13/07/26: Added wmp5_Barrel_PropTop.stl to the parts list. I got a request for an alternate barrel top without the wiimote holding section. ... An absolute classic! I'm tempted to do the little stubby MP5K too The suppressor absolutely blocks the wiimote sensor, so you will have to unscrew it in use. I included the fisheye lens thread in case you need it but its optional, not a requirement. You will need a small rubber band or pen spring for the trigger return. I got carried away with the magazines, so there are four to choose from. The hollow area in the Bstock_Back is for you to fill it with heavy things as a counter weight to the wiimote. Added Nunchuk (holder) & Barrel_Bottom_rail parts, I think you will work out what they are for. I printed mine with a 5% Rectilinear infill with basic pla. You might want a brim on the Bolts, Mags, Supp & Nunchuck (holder). I might try and make the suppressor lighter, maybe reduce the length of the inner barrel wall as its weight does strain on the bolt-like connection. Eyes on target! --PATREON & PATREON SHOP. -- https://www.patreon.com/3DFreeman Thanks for your continued support :)