cults3d
Sea Mine Urchin Style Fishing Bait Mold with optional weight keeper - 23mm
- Designer
- DCSooner
- Designer relation
- Ingen
- Kategori
- Sports & Outdoor
- Licens
-
Ukendt Ikke mappet til Scout licenskatalog
- Designer commercial
- None
- Først set
- 2026-07-13 05:34
- Sidst set
- 2026-07-14 20:55
- Tags
Beskrivelse
This thoughtfully crafted 3D printed mold takes after the popular urchin style fishing baits, which are extremely expensive. Save money and make your own! Created with a hole inside the body to place a weight. If not desired, just snap off this part. 4-part mold allows for easy separation and ensures an accurate mold. Recommend using with the provided bolt holes to tighten down the mold. Requires 6in long bolts and fender washers. Body diameter: 23mm Tentacle length: 65mm Tentacle diameter: 5mm to 2mm Tips: - Lubricate the surface area of the lure cavity (make sure to clean the mating surfaces to prevent flashing) - Firmly clamp the 4 pieces together - Injection temp of your plastisol should be around 265-280 - Allow the mold to fully cool before separating
Kandidatvurdering
Opdateret 2026-09-18 11:05Sub-scores
Hvorfor
- cults3d 7d rank #66.
- Rank er forbedret fra 12 timers gennemsnit #66.5 til #66.
- Engagement score 8.9: 7 usage, 1 likes.
- Produktmatch-signaler: mold.
- Kandidat er kun til et originalt 3D Michael design fra bunden.
Relaterede modeller
Snapshots
| Tid | Rank | Usage | Likes | Hot | Design |
|---|---|---|---|---|---|
| 2026-07-14 20:55 | 66 | 7 | 1 | 35 | - |
| 2026-07-14 18:03 | 67 | 7 | 1 | 34 | - |
| 2026-07-14 12:55 | 67 | 7 | 1 | 34 | - |
| 2026-07-14 10:07 | 66 | 7 | 1 | 35 | - |
| 2026-07-14 09:42 | 66 | 7 | 1 | 35 | - |
| 2026-07-14 01:22 | 63 | 7 | 1 | 38 | - |
| 2026-07-13 20:55 | 65 | 7 | 1 | 36 | - |
| 2026-07-13 17:32 | 65 | 7 | 1 | 36 | - |
| 2026-07-13 13:23 | 65 | 7 | 1 | 36 | - |
| 2026-07-13 10:25 | 65 | 7 | 1 | 36 | - |
| 2026-07-13 05:34 | 65 | 7 | 1 | 36 | - |