God of War Blades of Chaos

Designer

VectorWorks

Designer relation

Ingen

Kategori

Props

Licens

Creative Commons Attribution ShareAlike Creative Commons - Attribution - Share Alike

$ ↺ SA

Attribution påkrævet; afledte værker skal deles under kompatibel ShareAlike-licens.

Designer commercial

None

Først set

2026-07-11 01:42

Sidst set

2026-07-15 20:20

Tags

god of war god of war ragnarok kratos

Beskrivelse

The model is slightly longer than the real Blades of Chaos, with the model coming in at ~28 in Just like my previous Draupnir Spear, this model is also fully 3D printed and involves threads in the handle, and the blade is glued with the same PVA glue I used for the spear.  All of the parts need support, and I'd recommend a brim as well, just to be safe. The big gold piece in the middle (idk what its called) has 2 square pegs to hold the blade, but those are just to guide the blade piece, not to hold it. It still needs glue to secure it properly DISCLAIMER: When I ended up printing mine, one of the blade pieces ended up warping while printing. I edited the files and it still warped a bit when I finished. I was able to fix this with some woodfiller, but if anyone has any ideas on how to fix this, please let me know. When printing, each piece is labeled with a number. Follow the image guide above for how to assemble it same as the spear. Infill: 15% Material: PLA Supports: Handle parts need support, but the blade parts don't Brim: All parts are required