Tiny Flexi Manta Ray| BONBON Capsule Surprise Creonic Lab 58

Designer

Creonic Lab

Designer relation

Ingen

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-09 17:50

Sidst set

2026-07-09 17:50

Tags

mantaray candy bonbon capsule bonbon capsules bonbon contest candy piggy bank capsule toy flexi manta ray mini manta ocean toy sea animal fidget toy 'collectible art collectible surprise toy vending machine kawaii cute animal print in place tiny toy tiny toys flexible toy 3d printed toy manta ray manta childrens toy childrens toys

Beskrivelse

Tiny Flexi Manta | BONBON Capsule Surprise A tiny flexible manta ray designed as a mini surprise collectible for the BONBON 2.7-inch capsule vending machine. This BONBON version is based on my larger flexible manta ray design, but scaled and adjusted to fit inside the official BONBON capsule checker. The curved body shape, segmented details, and cute eyes make it a small ocean-themed collectible with a simple fidget-style movement. Designed to fit inside the official BONBON 2.7-inch capsule checker in a curled position. Important Capsule Fit Note: This model is designed for the BONBON 2.7-inch capsule contest. https://makerworld.com/uk/models/2566374-bonbon-2-7-inch-capsule-content-checker The capsule checker shown in the photos was taken from the contest host/creator’s MakerWorld profile and used to test the model size. The model was checked inside the official contest-size checker to confirm the fit. Features: - Mini flexible manta ray - Capsule-sized BONBON version - Cute ocean-themed surprise toy - Small fidget-style movement - Fits inside the BONBON 2.7-inch capsule checker - Print-in-place - No supports required - Flexible articulated design - Beginner-friendly - Optional 6 mm glass eyes (example: AliExpress – https://pl.aliexpress.com/item/1005008637632637.html ) - Great as a vending machine surprise, desk toy, collectible, or small gift Recommended print settings: - Layer height: 0.12–0.16 mm recommended - PLA recommended - Slow outer walls for cleaner details - Make sure the print bed is clean for small parts Tip: If the first layer looks nervous or starts to curl, switch the printer speed to Silent mode / 50% for the first few layers. After the base is stable, you can switch back to Standard / 100%. More of my print-in-place designs: 👇