Jetpack Worm

Designer

Malmo Toys

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-09-16 02:45

Sidst set

2026-09-16 02:45

Tags

worms armageddon game videogame team17 jet jetpack collection collectible toy desk office table mini kids nostalgia fire smoke happy soldier gun weapon war ww ww2 belic helmet ps playstation pc computer

Beskrivelse

✨ Support & Commercial Rights Love this design? By joining my Patreon, you not only get the right to sell physical 3D prints of my models, but you also support me in creating more awesome content for the community! 🚀 Get your Commercial License here: https://www.patreon.com/14647005/join ------------------------------------------------------------------ Bring classic artillery strategy nostalgia to your shelf with this iconic Worm using a Jetpack from Worms Armageddon! Standing at an impressive 42 cm (16.5 inches) tall, this model is scaled consistently with my other 18 cm standing worm models, making it a perfect centerpiece for your collection. 🎨 Features & Design No AMS Required: Designed specifically for multi-part printing by color. You can print each piece in its intended color without waste or multi-color systems! Scale: 42 cm total height (Scaled to match the rest of my 18 cm worm collection). Detailed Sculpt: Captures the classic expression, flame trails, smoke base, and control handles straight out of the game. 🧩 Assembly & Important Tips This model requires glue for final assembly. Please take note of the following steps to ensure a smooth build: Test Fit First (Dry Fit): Do NOT apply glue immediately when connecting the worm's body to the jetpack. Make sure to test the alignment and fit of the main components first. Once you verify everything sits flushed and correctly aligned, apply your adhesive. Pay Attention to Left / Right Orientation: Jetpack Arms & Handles: The left and right control arms/handles look similar. Double-check their orientation before gluing. Jetpack Flames: Check the angle and curve of the flame trails before attaching them permanently to make sure each piece goes to its correct side. Adhesive: Standard superglue (Cyanoacrylate / CA glue) or 2-part epoxy works best. 🖨️ Recommended Print Settings Layer Height: 0.16mm – 0.20mm (lower layer heights give smoother curves on the head and smoke base). Infill: 10%–15% (Grid or Gyroid). Supports: Needed only for certain overhangs (check individual part orientations in your slicer). If you like this design, check out my profile for the rest of the 18 cm Worms collection! Don't forget to boost and upload your makes—I'd love to see your prints! Check on my youtube channel the mounting process video!! https://youtube.com/shorts/-LNgCsCIeUk?si=EwfRYfTWA6KFmkBY ------------------------------------------------------------------ 🆓 Enjoying this model? I share my designs for free for the community. The best way to say "Thanks" is with a Like ❤️ and a Boost 🚀 📢 Did you print it? Upload a photo! Seeing your makes is the best part of designing 🤗 Boost Me (for free) "Fuel for my 3D printer (and my coffee) ☕" Boost