Stackable fruit bowls

Designer

Gazzaladra

Designer relation

Ingen

Kategori

Home & Garden/All

Licens

43df87b2-9e52-4c22-a6bc-623731440315/StandardDigitalFileLicense.txt Ikke mappet til Scout licenskatalog

Designer commercial

Patreon

Først set

2026-09-14 20:14

Sidst set

2026-09-18 08:30

Tags

bowl tray bowls catch all catchall catch-all vase decoration storage bin stackable box boxes fruit fruits kiwi orange lime

Beskrivelse

**Pretty fruit bowls. They are stackable and come with a modular wall mount, so you can display them while having them stored away.** The files are provided as multi-color 3MFs. **Designs** - Watermelon: Prints in a 4-color part and a 1-color part that you simply glue in - Lemon / Orange / Lime: Prints in 2 colors - Kiwi: Prints in 4 colors and optional fuzzy skin on the outside **Instructions** - Print your bowls - Print the top and as many main holder elements as you need - Glue the red part into the watermelon bowl - Place the top holder on your wall. You can either use screws and dowels, the holes have a diameter of 5.5 mm, or wall mount tape. - Connect the holders with a piece of filament as hinge and also mount them with screws or tape - Place your bowls Size: One bowl is about 200 x 50 mm big **Print settings** Required build volume: 230 x 230 x 100 mm – if you rotate the holders by 45 degrees, it also fits a 220 x 200 mm print bed Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none