Gate PTX Holster

Designer

eclipse3dworks

Designer relation

Ingen

Kategori

Airsoft

Licens

Ukendt Ikke mappet til Scout licenskatalog

Designer commercial

None

Først set

2026-09-14 19:51

Sidst set

2026-09-14 20:53

Tags

airsoft holster gate ptx

Beskrivelse

Got annoyed of the lack of holsters compatible with the Gate PTX pistol so i made one based on the DTD mk23 one. Some parts are pretty tight so attaching the top part on the main body might require a bit of strength. and there's the slot for the allen key that comes with the PTX for the hop up so you can carry it with you on the field and the attach system is the standard rotary adapter for IMI and all the copies of the attachment. When putting the bolt in, DO NOT overtighten it or it will block the system in place. I've added a picture of the trigger guard and trigger lock part so you can see the orientation to print those two pieces. The rest is basically print it flat. You will need two pieces of hardware: 1x M6x30 screw with a rounded head 1x compression spring 0.8mm WD, 8mm OD, 30 or 32mm length