thingiverse
Soda can lid with a tight fit and knurling
- Designer
- foil-fencer666
- Designer relation
- Ingen
- Kategori
- 12 & 16oz Can Lid
- Licens
-
Creative Commons Attribution ShareAlike Creative Commons - Attribution - Share AlikeAttribution påkrævet; afledte værker skal deles under kompatibel ShareAlike-licens.
- Designer commercial
- None
- Først set
- 2026-09-14 19:50
- Sidst set
- 2026-09-18 08:20
- Tags
Beskrivelse
I liked the original design to put a lid on a drink can, but, at least on my cans, it was quite a loose fit. I slightly shrunk the design to make it a tight friction fit. It was then quite difficult to remove, so I added some knurling to the outer edge so you could get a better grip to twist and remove the cap I printed mine with PETG, .16 layer height, 15% infill, & no supports (The text on the top was added after printing with a laser engraver and a paint pen)
Kandidatvurdering
Opdateret 2026-09-18 10:05
opportunity
Opportunity
49.5
▼
Sub-scores
Hvorfor
- thingiverse 7d rank #10.
- Rank er forbedret fra 12 timers gennemsnit #10.7 til #10.
- Engagement score 20.1: 12 usage, 54 likes.
- License score 75: modellens egen licens indikerer mulig direkte brug med lav betalingsfriktion; verificer altid rettigheder manuelt.
- Kilden indeholder commercial/Patreon/merchant signal; licens skal verificeres manuelt.
- Produktmatch-signaler: cap.
- Licenssignal fundet; modellen kan være en direkte mulighed, men rettigheder skal verificeres.
Snapshots
| Tid | Rank | Usage | Likes | Hot | Design |
|---|---|---|---|---|---|
| 2026-09-18 08:20 | 10 | 12 | 54 | 91 | - |
| 2026-09-18 04:20 | 10 | 12 | 52 | 91 | - |
| 2026-09-18 00:20 | 10 | 12 | 51 | 91 | - |
| 2026-09-17 20:20 | 12 | 9 | 47 | 89 | - |
| 2026-09-17 16:20 | 14 | 8 | 44 | 87 | - |
| 2026-09-17 12:20 | 14 | 7 | 40 | 87 | - |
| 2026-09-17 08:20 | 16 | 7 | 39 | 85 | - |
| 2026-09-17 04:20 | 19 | 7 | 38 | 82 | - |
| 2026-09-17 00:20 | 19 | 7 | 36 | 82 | - |
| 2026-09-16 20:20 | 21 | 7 | 33 | 80 | - |
| 2026-09-16 16:20 | 20 | 6 | 31 | 81 | - |
| 2026-09-16 12:20 | 20 | 5 | 28 | 81 | - |
| 2026-09-16 08:20 | 22 | 5 | 27 | 79 | - |
| 2026-09-16 04:20 | 23 | 5 | 26 | 78 | - |
| 2026-09-16 00:20 | 27 | 4 | 22 | 74 | - |
| 2026-09-15 20:20 | 30 | 4 | 21 | 71 | - |
| 2026-09-15 16:20 | 37 | 3 | 19 | 64 | - |
| 2026-09-15 12:20 | 48 | 2 | 15 | 53 | - |
| 2026-09-15 08:20 | 50 | 2 | 15 | 51 | - |
| 2026-09-15 04:20 | 54 | 2 | 14 | 47 | - |
| 2026-09-15 00:20 | 59 | 2 | 13 | 42 | - |
| 2026-09-14 20:52 | 66 | 2 | 12 | 35 | - |
| 2026-09-14 20:51 | 66 | 2 | 12 | 35 | - |
| 2026-09-14 20:50 | 66 | 2 | 12 | 35 | - |
| 2026-09-14 20:50 | 66 | 2 | 12 | 35 | - |
| 2026-09-14 20:48 | 66 | 2 | 12 | 35 | - |
| 2026-09-14 20:47 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:46 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:45 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:44 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:43 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:42 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:41 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:40 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:39 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:38 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:37 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:36 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:35 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:34 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:33 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:32 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:31 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:29 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:28 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:28 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:27 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:26 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:25 | 64 | 2 | 12 | 37 | - |
| 2026-09-14 20:17 | 64 | 2 | 12 | 37 | - |