GIF

Designer

MeasureOnce

Designer relation

Ingen

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-09 17:50

Sidst set

2026-07-09 17:50

Tags

nasa fabric ball pokeball Pokemon Pokemon Go Pokemon TCG pokeball 3d pokeball accessory pokemon 006 fidget fidget 2 click nasafabric print in place sphere fidget ball sphere ball Pikachu poke pokemon pokeball pokemon toy charzard charmander pokemon fidget fidgeting toy toy fidget magic nasa collapsing collapsable pokemon ball collapsable fidget

Beskrivelse

Boost Me (for free) Please boost if you like my model! Boost Commercial license - https://www.patreon.com/c/MeasureOnce NASA FABRIC Collection: https://makerworld.com/en/collections/17685211-nasa-fabric-models PLEASE READ! Important Notes: CLEAN YOUR BUILDPLATE AND USE GLUE BEFORE PRINTING! LAYER ADHESION IS VERY VERY IMPORTANT USE PLA MATTE or PLA BASIC. This model has not been tested with silk filaments. I do not recommend using them due to the potential for over extrusion which can cause the layers to fuse and/or warp. If you are printing the NO AMS Version, Please use a layer height of 0.16mm. Do not change this value. If it does get changed, the color swaps will not be applied to the appropriate layer and the part will come out looking off. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- This model uses 62 4x2 magnets. Alternatively, you can glue the slices together without magnets. Maker's Supply Store - https://us.store.bambulab.com/products/round-magnet?id=42102911074440 Amazon Link - https://www.amazon.com/dp/B0F4MYLY85 Print Settings: Filament: Only PLA matte or PLA basic Layer height: 0.16 Walls: 4 Wall Generator: Arachne Color Swaps: WARNING!! LAYERS CORRESPOND TO A LAYER HEIGHT OF 0.16. IF YOU CHANGE THE LAYER HEIGHT THEN THE COLORS WILL BE PLACED IN INCORRECT POSITIONS. Start: Black Layer 57: Red Layer 59: White Magnet Assembly: The magnets will need to be glued in. Start putting magnets of the same polarity on one side of each lobe. Work your way around clockwise, only putting magnets of the same polarity onto the same side of each lobe. Once all the magnets with the same outward facing polarity are assembled, flip the magnets over and repeat. See image below