Skulls N' Roses - Bookmarks Set

Designer

C3D

Designer relation

Followed

Kategori

Art

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-17 10:32

Sidst set

2026-07-17 10:32

Tags

hueforge hue forge painting filamentpainting filament painting 2d 2dart 2d art 2d3d 2d 3d 2d3dart 2d 3d art bookmark bookmarks book mark reading book reader book lover booklover bookworm booknerd bookish bookaddict gunsnroses skulls roses valentine valentines valentines 2025 love

Beskrivelse

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World: Membership C3D Commercial Membership - Authorized Merchant Join Introducing Skulls N' Roses, a bold and striking bookmark set that's easily one of my all-time favorites! 🌹💀 These bookmarks combine intricate skull designs with vibrant red roses and lush green leaves, creating a perfect balance of edgy and elegant. Not gonna lie—this set was the hardest and most time-consuming bookmark project I’ve ever made. From the fine details in the skulls to the vibrant layering of colors, each bookmark feels like a little piece of art. Oh, and if you're wondering—yes, the name is a nod to Guns N' Roses. Except these won't "rock you like a hurricane," but they might rock your books! 🎸📖 Whether you're into gothic vibes or just love a dramatic flair, these bookmarks will definitely make your reading time unforgettable. What do you think? 😊 For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle) The design allows for printing with simple color changes at layer, which saves a lot of filament! NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Jayo Black Transmission Distance: 0.3 / Amazon PLA BambuLab Basic Green Transmission Distance: 2 PLA EryOne Rose Red Transmission Distance: 2.2 / Amazon PLA Geetech Matte Light Gray Transmission Distance: 0.8 / Amazon PLA KINGROON WHITE Transmission Distance: 6.9 / Amazon Color Pallete: Swap Instructions: Start with Black At layer #8 (0.73mm) swap to Green At layer #10 (0.89mm) swap to Rose Red At layer #15 (1.29mm) swap to Light Gray At layer #17 (1.45mm) swap to WHITE for the rest. Boost Me (for free) Enjoying this model? Give it a boost! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀 Boost How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO Drop me a follow!🤜🤛