Frogget Me Not - Bookmark

Designer

C3D

Designer relation

Followed

Kategori

Art

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-17 10:32

Sidst set

2026-07-17 10:32

Tags

painting filamentpainting filament painting 2d 2dart 2d art 2d3d 2d 3d 2d3dart 2d 3d art bookmark bookmarks book mark reading book reader book lover booklover bookworm booknerd bookish bookaddict frog spring blossom flower cute

Beskrivelse

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World: Membership C3D Commercial Membership - Authorized Merchant Join 'Frogget Me Not' 🐸🌼 brings a little pondside charm to your reading sessions! This bookmark features an adorable frog perched among delicate daisies, giving off the perfect mix of whimsy and nature. 🌿✨ The lush green background and bright white petals make it pop, while the matching tassel adds an extra fun touch. 💚 Whether you're a frog lover, a flower fan, or just want a bookmark that makes you smile, this one's for you! 📖💖 For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.2 nozzle) The design allows for printing with simple color changes at layer, which saves a lot of filament! NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Jayo Black Transmission Distance: 0.3 / Amazon PLA Prusament Army Green Transmission Distance: 0.4 / Amazon PLA EryOne Apple Green Transmission Distance: 5 / Amazon PLA KINGROON Orange Transmission Distance: 4.5 / Amazon PLA Jayo Matte White Transmission Distance: 4.2 / Amazon Color Pallete 5 Color Version: Swap Instructions 5 Color Version: Start with Black At layer #8 (0.72mm) swap to Army Green At layer #9 (0.8mm) swap to Apple Green At layer #12 (1.04mm) swap to Orange At layer #15 (1.28mm) swap to Matte White for the rest. Color Pallete 4 Color Version: Swap Instructions 4 Color Version: Start with Black At layer #8 (0.72mm) swap to Apple Green At layer #12 (1.04mm) swap to Orange At layer #15 (1.28mm) swap to Matte White for the rest. Boost Me (for free) Enjoying this model? Give it a boost! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀 Boost How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO Drop me a follow!🤜🤛