Seaside Siesta - Bookmark

Designer

C3D

Designer relation

Followed

Kategori

Art

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-17 10:32

Sidst set

2026-07-17 10:32

Tags

filamentpainting filament painting 2d 2dart 2d art 2d3d 2d 3d 2d3dart 2d 3d art bookmark bookmarks book mark reading book reader book lover booklover bookworm booknerd bookish bookaddict beach sun ocean girl summer sea waves

Beskrivelse

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World: Membership C3D Commercial Membership - Authorized Merchant Join Seaside Siesta 🌊☀️🏖️ Take a little getaway with every page turn! Seaside Siesta is a relaxing bookmark inspired by the simple joys of a day at the beach. Imagine gently lapping waves, warm sunlight, and a bright umbrella casting a cool shadow over your reading spot. This design brings breezy, coastal vibes to your books, making it perfect for anyone who loves the ocean, sunny days, or just wants to add a touch of summer to their reading routine. Whether you’re curled up indoors or actually lounging by the shore, Seaside Siesta will keep your place with style and serenity. The pictures show a model printed with a 0.4 nozzle The design allows for printing with simple color changes at layer, which saves a lot of filament! USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Jayo Black Transmission Distance: 0.3 / Amazon PLA Bambu Basic Cocoa Brown Transmission Distance: 0.4 PLA KINGROON Brown Transmission Distance: 3.3 / Amazon (You can also try orange) PLA KINGROON Yellow Transmission Distance: 6 / Amazon PLA Anycubic Pantone Tropical Turquoise Transmission Distance: 2.6 / Amazon PLA Anycubic Bright White Transmission Distance: 2.3 / Amazon PLA+ EryOne Magenta (HyperSpeed) Transmission Distance: 3.3 / Amazon Color Pallete: Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Cocoa Brown At layer #8 (0.72mm) swap to Light Brown / Dark Skin/ Dark Orange At layer #10 (0.88mm) swap to Yellow At layer #12 (1.04mm) swap to Tropical Turquoise At layer #15 (1.28mm) swap to Bright White At layer #18 (1.52mm) swap to Magenta for the rest. Boost Me (for free) Enjoying this model? Give it a boost! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀 Boost How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to my models. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO Drop me a follow!🤜🤛