Obanai Iguro - Demon Slayer Door Hangers

Designer

C3D

Designer relation

Followed

Kategori

Art

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-17 10:32

Sidst set

2026-07-17 10:32

Tags

hueforge hue forge 2d 2dart 2d art 2d3d 2d 3d 2d3dart 2d 3d art

Beskrivelse

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World: Membership C3D Commercial Membership - Authorized Merchant Join Obanai Iguro Door Hanger 🐍⚔️🚪 Bring some Serpent Hashira intensity to your door with this Obanai Iguro door hanger. The striking grey tones, detailed snake companion and classic striped haori make this design instantly recognizable and full of character, even in the minimalist faceless style. Perfect for Demon Slayer fans who appreciate subtle but powerful anime decor. Hang it confidently on your room, office or workshop door to show your Hashira pride. The tall format and comfortable handle cut make it both functional and visually striking from across the room. ✨ Features Obanai Iguro inspired door hanger with his signature snake and haori pattern Strong contrast with greys, whites and subtle reds for a dramatic look Clean rounded top and smooth edges for easy handling Great collectible for Demon Slayer fans and anime room decor lovers Maker notes: While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️ Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧 Print the rest! USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA KINGROON Black Transmission Distance: 0.4 / Amazon PLA Bambu Basic Cocoa Brown Transmission Distance: 0.4 PLA BambuLab Sunflower Yellow Transmission Distance: 4 PLA Anycubic Pantone Peach Fuzz Transmission Distance: 4.2 / Amazon PLA Jayo Matte White Transmission Distance: 3.8 / Amazon Color Pallete: Swap Instructions: Start with Gray At layer #7 (0.65mm) swap to Black At layer #10 (0.89mm) swap to Meta Gray At layer #13 (1.13mm) swap to Gray At layer #17 (1.45mm) swap to Peach Fuzz At layer #19 (1.61mm) swap to Matte White At layer #22 (1.85mm) swap to Fire Engine Red for the rest. Boost Me (for free) Enjoying this model? Give it a boost — ITS FREE! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀 Boost How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO Drop me a follow!🤜🤛