Moon lamp with a wavy base (fluffy surface)

Designer

Flummi13

Designer relation

Ingen

Kategori

Home & Decoration > Kitchen & Bathroom

Licens

Creative Commons Attribution NonCommercial Creative Commons Attribution - NonCommercial- ShareAlike

$ ↺

Attribution påkrævet; kommerciel brug er ikke tilladt.

Designer commercial

None

Først set

2026-07-16 10:19

Sidst set

2026-07-24 20:41

Tags

Ingen tags fundet

Beskrivelse

This model is based on this’s model :https://www.printables.com/model/23859-design-moon-lamp Key Features: Moon Lamp: Designed for a standard E27 lamp socket , the moon is printed with a and a to ensure a smooth, solid structure. It requires and takes approximately to print. Adapter: The adapter secures the moon lamp to the socket and is printed with a , featuring and a for added strength. It too is printed . The base boasts an , including the top, giving it a distinctive, organic appearance. Settings used: - Fluffy Surface: All walls - Spacing of Fluffy Surface Points: 0.5 - Thickness of Fluffy Surface: 0.5 - Hilbert curve - 1.7 Printing Settings: - Material: PLA - Layer Height: 0.2 mm (moon & base), 0.16 mm (adapter) - Wall Perimeters: 2 (moon & base), 3 (adapter) - Infill Rate: 100% (moon), 30% (adapter), 15% (base) - Infill Pattern: Straight lines (moon), gyroid (adapter & base) - After printing, assembly is —just insert a standard (not included) into the adapter, then lock the adapter onto the moon’s base.