Sereed Balance Bike Seat Extension

Designer

brun064

Designer relation

Ingen

Kategori

Sports & Outdoor > Outdoor Sports

Licens

Creative Commons Attribution NonCommercial ShareAlike Creative Commons — Attribution — Noncommercial — Share Alike

$ ↺ SA

Attribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.

Designer commercial

None

Først set

2026-07-16 10:19

Sidst set

2026-07-16 20:10

Tags

balancebike sereed

Beskrivelse

Seat extension for Sereed balance bike. My kid loves this bike to scoot around the house, but it's too short for him. This adds about 2" to the existing seat. Uses M5x70mm bolts to mount the old seat mount to the frame through the extension. There was an attempt to make this work with shorter bolts and a nuts that could be pushed through the side. I determined the longer bolts are probably more secure as it provides a solid connection from seat to the frame. If you want to use shorter bolts and M5 nuts, slide the nuts through the side then use M5x20 bolts to attach to the bike. Then use the existing M5 bolts that came with the bike to attach the seat to the extension. I haven't tested this, so let me know how it works. Print with 0.2mm layers, 4 walls and 20% infill.