Double Wall Hook | Coat Hanger | Towel Rack

Designer

yekta

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

wall hook wall hook hanger strong rugged bag accessories holder coat hanger bagholder office accessories house accessories towel hanger shower clothes cloth hanger wall hanger organizer kitchen door accessory minimalistic ribbed decor towel peg towel holder door hook rack coat bathroom bathroom accessories towel kitchen accessories wardrobe modern japandi bath towel accessory towel hook cloth hook yekta

Beskrivelse

Check out my newly released models: Backpack Hanger Shower Wall Hook ----------------------------------------------------- My wall hook with its ribbed design has been well-received and some have asked for a double hook version. Here it is. This is a multi-purpose wall hook. It can be used as a coat hanger, towel hanger, bag hook etc. If you are planning to use heavy items, I would highly recommend the screw mount version. Boost Me (for free) I put a lot of time and effort into designing and testing my models. If you like my work, give it a boost to help me continue. Boost Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉 There are 2 versions: 1- Double-sided Tape Version: There is a slot on the back on this version. The slot accepts maximum 17mm wide tape (smaller also works). The slot is textured. Thick & transparent tape will stick significantly better to a textured surface as opposed to a smooth one with PLA, PETG etc. I've tested this very extensively across 5 different models which have a total print count of 30,000+. I would highly recommend thick & transparent double-sided tape (sometimes has red lining) because foamy ones tend to leave residue, and thin ones are not strong enough: Link to the recommended double-sided tape. 2- Screw Mount Version: This one comes in two pieces: The hanger itself and the mount. The mount has slots for 2 screws. These have 8.5mm diameter entry and 4.4mm exit to fit various screws. Before screwing the mount in, make sure the parts fit together. The fit is quite tight to prevent wobble. If it's too tight with your particular printer & filament, you can sand down the little nibs of the mount. Before mounting it to the wall, make sure to insert and remove it a couple of times to make it fit smoother. If you are having a hard time removing the mount from the hanger, just push it out with a screw driver or something similar. There are slots for doing exactly that. Dimensions: 21.6 × 35.6 × 118mm (X × Y × Z) ----------------------------------------------------------- Check out my other models: Toothpaste Squeezer Mini Bag Clip v2 Compact Phone Stand Belt Hanger | Belt Hook Clothes Hanger Connector Hook Universal Table Hanger | Bag Hanger Over the Door Hook Mini Desktop Trash Bin - Fast Print (Vase Mode) Auto-locking Hanger (Ribbed)