Imp / Gnome Lamp Christmas

Designer

Westtech_3D

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

imp gnome decor deco decoration lamp LED Christmas xmas lightbox

Beskrivelse

🎁🎄🧑🏼🎄 Gnome Lamp – Stylish & Easy to 3D Print Here you'll find a stylish lamp that you can easily print yourself – perfect for a cozy atmosphere at home. Two versions are available: 🧷 Version 1: Glued 🔩 Version 2: Screwed ______________________________________ 🛠️ Recommended Print Settings: 🔲 Main Part Optimal Layer Height: 0.16 mm for fine details Time-saving Alternative: up to max. 0.20 mm 🪵 Back Panel with Diffuser Recommended: 0.20 mm Maximum: 0.24 mm This provides a particularly soft, pleasant light – ideal for a cozy atmosphere. 💡 Note on the Back Panel: The back panel is deliberately a bit loose, as I glue it before shipping. If you want a tighter fit, you can scale the back panel in the slicer by 0.5% to 1% – just try what works best for you! 🔧 Details for the Glued Version LED Holder: This should be fixed with some plastic adhesive. LED Strips: Simply insert – they usually hold well due to the adhesive on the back. The printed support prevents the strips from detaching when heated (e.g., by COB LEDs). Recommended LED Strip Length: at least 74 cm 🔩 Details for the Screwed Version 🔩🪛 Required Accessories: 5x M3x6 Heat Set Inserts 5x M3x12 Screws 🔧 Tip: Please do not overtighten the screws to avoid damage. Embed 5x M3x6 Heat Set Threads You need 5x M3x6 Heat Set Inserts & 5x M3x12 I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! Happy Printing! Membership Information on commercial licensing on MakerWorld Join