Christmas Decor

Designer

Westtech_3D

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

deco decoration decor Light lightbox Christmas xmas LED

Beskrivelse

Christmas Lamp – Stylish & Easy to 3D Print Here you will find a stylish lamp that you can easily print yourself – perfect for a cozy atmosphere at home. Two versions are available: 🧷 Version 1: Glued 🔩 Version 2: Screwed ______________________________________ 🛠️ Recommended Print Settings: 🔲 Main Body Optimal Layer Height: 0.16 mm for fine details Time-saving Alternative: up to max. 0.20 mm 🪵 Back Panel with Diffuser Recommended: 0.20 mm Maximum: 0.24 mm This provides a particularly soft, pleasant light – ideal for a cozy atmosphere. 💡 Note on the Back Panel: The back panel is intentionally a bit looser, as I glue it before shipping. If you want a tighter fit, you can increase the back panel by 0.5% to 1% in the slicer – just try what works best for you! 🔧 Details for the Glued Version LED Holder: This should be fixed with some plastic adhesive. LED Strips: Simply insert – they usually hold well due to the adhesive surface on the back. The printed support prevents the strips from detaching when heated (e.g., by COB LEDs). Recommended LED Strip Length: at least 74 cm 🔩 Details for the Screwed Version 🔩🪛 Required Accessories: 5x M3x6 heat-set inserts 5x M3x12 screws 🔧 Tip: Please do not overtighten the screws to avoid damage. Melt in 5x M3x6 threads You need 5x M3x6 heat-set inserts & 5x M3x12 I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! Happy Printing! Membership Information on commercial licensing on MakerWorld Join