Church Christmas Lamp

Designer

Westtech_3D

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

kirche church lamp lightbox LED decor deco decoration xmas Christmas Santa

Beskrivelse

Christmas Lamp – Stylish & Easy to Print Yourself Here you'll find a stylish lamp that you can easily print yourself – perfect for a cozy atmosphere at home. Two variants are available: 🧷 Variant 1: Glued 🔩 Variant 2: Screwed ______________________________________ 🛠️ Recommended Print Settings: 🔲 Main Part Optimal Layer Height: 0.16 mm for fine details Time-saving alternative: up to max. 0.20 mm 🪵 Back Panel with Diffuser Recommended: 0.20 mm Maximum: 0.24 mm This ensures a particularly soft, pleasant light – ideal for a cozy atmosphere. 💡 Note on the Back Panel: The back panel is deliberately a bit looser because I glue it before shipping. If you want a tighter fit, you can enlarge the back panel in the slicer by 0.5% to 1% – just try what works best for you! 🔧 Details for the Glued Version LED Holder: This should be secured with some plastic adhesive. LED Strips: Simply insert them – they usually hold well due to the adhesive surface on the back. The printed support prevents the strips from detaching when heated (e.g., by COB LEDs). Recommended length of LED strip: at least 74 cm 🔩 Details for the Screwed Version 🔩🪛 Required Accessories: 5x M3x6 Heat-set Inserts 5x M3x12 Screws 🔧 Tip: Please do not overtighten the screws to avoid damage. Melt in 5x M3x6 Threads You need 5x M3x6 Heat-set Inserts & 5x M3x12 I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! Happy Printing! Membership Information on commercial licensing on MakerWorld Join