Santa Claus in the Snow

Designer

Westtech_3D

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

lamp LED Christmas xmas Santa snow deer lightbox decor deco decoration

Beskrivelse

Santa by Night - Lamp – Stylish & Easy to Print Yourself Here you will find a stylish lamp that you can easily print yourself – perfect for an atmospheric ambiance at home. Two versions are available: 🧷 Version 1: Glued 🔩 Version 2: Screwed ______________________________________ 🛠️ Recommended print settings: 🔲 Main part Optimal layer height: 0.16 mm for fine details Time-saving alternative: up to max. 0.20 mm 🪵 Back panel with diffuser Recommended: 0.20 mm Maximum: 0.24 mm This provides a particularly soft, pleasant light – ideal for a cozy atmosphere. 💡 Note on the back panel: The back panel is intentionally a bit looser as I glue it before shipping. If you prefer a tighter fit, you can increase the back panel in the slicer by 0.5% to 1% – just try what works best for you! 🔧 Details for the glued version LED strips: Simply insert them – they usually hold well due to the adhesive on the back. The printed support prevents the strips from detaching when heated (e.g., by COB LEDs). Recommended LED strip length: at least 74 cm 🔩 Details for the screwed version 🔩🪛 Required accessories: 5x M3x6 heat-set thread inserts 5x M3x12 screws 🔧 Tip: Please do not overtighten the screws to avoid damage. Melt in 5x M3x6 threads You need 5x M3x6 heat-set threads & 5x M3x12 I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! Happy Printing! Membership Information on commercial licensing on MakerWorld Join