MONOLITH–Asymmetric Business Card Holder Swapfront

Designer

The Big Greek

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

business business accessories business advertising business art businesscard businesscard holder businesscard stand businesscardandpenholder businesscardbox business card business card box business card case business card cutter business card display business card stand office office 3d accessories office accents office accesories office accesorries card card accessories modern design design 2025 design 3d design accessories design accessory office desk accessories asymetric swapfront the big greek tbg

Beskrivelse

MONOLITH – Asymmetric Business Card Holder with Swappable Front Description: The MONOLITH isn’t your average card holder. It plays with volume, geometry, and contrast – not just visually, but structurally. With its asymmetric, deliberately complex architecture, this piece stands out on any desk. Designed with modularity in mind, the front face attaches magnetically using two Ø6 × 2 mm neodymium magnets. You can swap between three included designs depending on your mood or style: A sleek version with a minimalist line detail A textured “wood look” panel for natural flair A blank panel ready for your own logo, engraving, or custom finish This holder fits standard business cards measuring 85 × 55 mm and can accommodate cards up to 108 mm wide. It holds a stack up to 23 mm thick – approximately 50 cards depending on paper thickness. Everything prints support-free, and the parts fit together with ease. Just glue the magnets and rubber feet (Ø8 mm) into place, snap on your preferred front, and you’re done. The build guide is detailed and easy to follow, with clear visuals, sizing info, and magnet polarity warnings to help you avoid surprises. 🧲 The correct magnets (Ø6 × 2 mm) are listed in the parts section – ready to order directly via Bambu Lab if needed. Recommended Print Settings: Material: PLA or PETG Layer height: 0.2 mm Infill: 10–20 % No supports required Minimum build area: 130×130 mm Note: Check magnet polarity before gluing – reversed polarity will prevent the front panel from snapping on correctly. Boost Me (for free) If you like it - boost it Boost Membership Commercial Membership Link Join If you like my work/project consider supporting me with these options: leave a like leave a comment download the file or buy me a Coffee check out my Patreon Page! This article/post/text or the print profile as well as the finished print may not be used for commercial purposes. If you wish to sell the physical 3D prints of my designs commercially or use the LICENSE here on MAKER WORLD • Obtain a Commercial Licence Have fun printing