The Lord Of The Rings Lamp

Designer

Olyer

Designer relation

Ingen

Kategori

Decor

Licens

Creative Commons Attribution NonCommercial ShareAlike Creative Commons - Attribution - Non-Commercial - Share Alike

$ ↺ SA

Attribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.

Designer commercial

None

Først set

2026-07-10 12:25

Sidst set

2026-07-10 12:49

Tags

Ingen tags fundet

Beskrivelse

Dimmed led lamp + USB charger 36W type -c inside Shade (overal size of ring is about 221mm) printed by PLA twinkled gold cuz it's semitransparent plastic with some glitters. All others parts by PETg. Clamp of shade printed in two parts for best suface quality and is glued after. Joint bolt came from GoPro kit + closed nut. Power supplies for the lamp and for the charger are different and both are 12V - 1.3A lamp , 3A charger A hole for wires in the ring have to be drilled or melted out on top and where Z seam is (keep this in mind when will slicing gcode). A hole for AC cable have to drilled after on the proper side of the wall mount bottom. inside components : https://www.aliexpress.com/item/1005002039334557.html?spm=a2g0o.detail.0.0.7b57SNkvSNkvzI https://www.aliexpress.com/item/1005007276280684.html?spm=a2g0o.productlist.main https://www.aliexpress.com/item/1005003451197905.html?spm=a2g0o . https://www.aliexpress.com/item/1005001970797548.html?spm=a2g0o . https://www.aliexpress.com/item/1005005697318066.html?spm=a2g0o.productlist.main .