Leaf Textured Wall Planter with Drip Tray

Designer

nordicreativa

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

wall planter planter plant indoor leaf drip tray

Beskrivelse

Boost Me (for free) Boost me for free Boost 🎯 Recommended Print Settings For best results, print this design with a 0.4mm nozzle at 0.24mm layer height for a great balance of speed and detail. Use 8% infill for a solid, lightweight print that won’t use too much material. 🌳Tree support is turned on with added support blockers. 🪛 Recommended Screw Size for Wall Mount: For the best fit in the default planter design (as provided in the file), use screws with a diameter of 0.16 inches (4.0 mm) and a length of 1 inch (25 mm). This is the ideal size for fitting into the holes of the planter wall mount. The plug size should be 5 mm in diameter for a secure fit. If you're in the U.S, look for screws that are #6 or #8 gauge with the appropriate length. Note: You can scale the model to your preferred size, but be sure to choose the correct screws based on the new hole size, as it will change with the scale. ⚡ Speed vs. Quality Trade-off The model is optimized for a 0.4mm nozzle, but I’ve also had success with a 0.6mm nozzle if you’re looking to speed things up. The larger nozzle won’t affect the strength, and the prints still look awesome. 🙏 If my designs bring a little joy to your day, you can support my work by buying me a coffee. Your support means the world! or you can boost me for free. Thank you Commercial license available for my models through Patreon. https://patreon.com/NordicCreativa Love My Designs? Support My Work with a Coffee ☕