Wall Mounted Planter Pot with Drip tray

Designer

nordicreativa

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

planter plant plantpot indoor wall mounted drip tray

Beskrivelse

Boost Me (for free) Boost me for free Boost 🎯 Recommended Print Settings For best results, print this design with a 0.4mm nozzle at 0.24mm layer height for a great balance of speed and detail. Use 8-15% infill for a solid, lightweight print that won’t use too much material. 🪛 Recommended Screw Size for Wall Mount: For the best fit in the default planter design (as provided in the file), use screws with a diameter of 0.16 inches (4.0 mm) and a length of 1 inch (25 mm). This is the ideal size for fitting into the holes of the planter wall mount. The plug size should be 5 mm in diameter for a secure fit. If you're in the U.S, look for screws that are #6 or #8 gauge with the appropriate length. Note: You can scale the model to your preferred size, but be sure to choose the correct screws based on the new hole size, as it will change with the scale. ⚡ Speed vs. Quality Trade-off The model is optimized for a 0.4mm nozzle, but I’ve also had success with a 0.6mm nozzle if you’re looking to speed things up. The larger nozzle won’t affect the strength, and the prints still look awesome Commercial license available for my models through Patreon. https://patreon.com/NordicCreativa Love My Designs? Support My Work with a Coffee ☕