makerworld
Jewelry box for rings - customizable slot
Beskrivelse
Boost Me (for free) Thanks for your support! Boost This jewelry box for rings is printed in vase mode. It ensures low filament consumption, fast printing, and a high-quality surface without a Z-seam. The width and length of the slot for the ring can be adjusted. Maximum ring diamater: Ø33mm Assembly: Insert the inner part with the slot into the lower outer shell. I recommend using a drop of glue so that nothing comes loose when the lid is removed. Customize: The standard print profile has a sloth length of 25mm and a slot width of 5,1mm for 5mm width rings. Use the “customize” button if you need other dimensions. For an optimal fit, select a slot width that is 0.1 mm wider than the width of the ring. For example, my ring is 5 mm wide, so I set the slot to 5.1 mm. The slot becomes slightly narrower towards the bottom so that the ring ideally starts to clamp in the lower area. After downloading the customized model, please press the auto align button: This screenshot shows the correct alignment.
Kandidatvurdering
Opdateret 2026-09-18 10:05Sub-scores
Der skal mindst to scoremålinger til før udviklingen kan vises.
Hvorfor
- Ingen aktuel trendplacering; curated/importerede snapshots giver ikke trendscore.
- Engagement score 54: 315 usage, 123 likes.
- License score 55: designerlicens estimerer ekstra omkostning/friktion og value-for-money; verificer altid rettigheder manuelt.
- Designerlicens value-for-money signal: 115 modeller til rådighed.
- Designer er markeret som followed; relationship score 15.
- Produktmatch-signaler: box, customizable, vase, insert, alignment.
- Licenssignal fundet; modellen kan være en direkte mulighed, men rettigheder skal verificeres.
Relaterede modeller
Snapshots
| Tid | Rank | Usage | Likes | Hot | Design |
|---|---|---|---|---|---|
| 2026-07-15 10:58 | 48 | 315 | 123 | 53 | - |