Stackable storage box (customizable)

Designer

mgm86

Designer relation

Followed

Kategori

Hobby & DIY

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

stackable storage box stackable storage boxes storage storage box Box customize customize box stapel stackable container visible storage box sichtlagerkasten stacking stacking box

Beskrivelse

Boost Me (for free) Thanks for your support! Boost These stackable boxes came in 3 different heights: 50, 75 and 100mm. The width, depth and the width of the label plate can be freely adjusted. Changelog: 01.09.2025: Versions without label plate are available. Feature overview: Stackable Stable design with reinforced upper frame 3 heights: 50, 75 and 100mm The width, depth and the width of the label plate can be freely adjusted. Inconspicuous label plate with free text (editable in Bambu Studio) The boxes snaped into place when stacked With and without label plate There are 3 standard sizes available as print profiles: S: 98 x 98 x 50mm (1,6mm wall thickness) M: 160 x 98 x 75mm (1,6mm wall thickness) L: 220 x 138 x 100mm (2,0mm wall thickness) Do you need different width/heights? No problem, read the following instruction: Customize instructions: After clicking on the customize button you can choose between the 3 heigths: 50, 75 and 100mm. After that you can edit the width, the depth and the label plate width in the specified range. Important: The label plate width must be at least 25mm shorter then the width. Print instructions: If you create your own box: • Seperate box and label plate with rightclick on the part → Split → to objects • Pull the label plate onto a new printing plate. • Click on the label plate and select the text bottom: You can freely choose the font/size etc. Here are my recommend settings: If you use one of the 3 standard profiles, then you only have to right click on the text_shape under “objects” and click on text edit: Print settings: Box and plate: standard settings for the box (0,2mm layer heigt, 15% Infill) Seam position: back Only label plate: “Arachne” wall generator for better text quality