Lid holder for round food container (with clamps)

Designer

mgm86

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

lid lid holder expandable modular kitchen organizer food container food container lid kitchen adaptable modular holder costomizable tupperware IKEA IKEA 365 lid organizer

Beskrivelse

Boost Me (for free) Thanks for your support! Boost This is a customizable and modular lid holder for round food container. It consists of two basic components: the standard holder and the end part. You can connect as many holders as you like. There is also a connector piece for connecting holders of different sizes. You can either print a single holder for each lid or alternatively place several lids in one large holder. Lid holder for rectangle lids with clamp: Link Features: - Customizable features: Lid diameter, clamp width, clamp height, thickness of the lid - Endlessly expandable - The holder can either be placed in a cabinet or attached to the inside of a kitchen cabinet door with double-sided adhesive tape. - Holders of different sizes can be connected with the optional connector part - Easy handling - Low filament consumption and fast printing Print profile The example set of standard part and end part fits to the IKEA 365 Lid with a diameter of 145mm. If you have other lids please use the customize button. Customize instructions: 1. Measure your lid: 2. Click on the customize Button and enter the values: See both screenshots. Measure the lid and enter the dimensions in the correct field. See colors: blue (lid diameter) green (height of the clamps) red (width of the clamps) orange (thickness of the lid). Add 2 mm depending on the value specified in the customization section (the smaller info text). Example for “Thickness of the lid” (orange): If your lids are 10mm thick, then choose the value 12 (10mm + 2) Instructions for the optional connector part: If you want to connect different sizes of the holder you can use the optional connector end part instead the standard end part: Choose “optional connector part” after clicking on the customize button. It is important that you enter the identical values as for the standard holder part. Differences to the standard customize modell: Thickness of the lid is missing (because it is an “end part”) New option: Clamp width of the next holder Here you must enter the identical width as you have choosen for the next smaller holder. Values for the A to B connector part Height: The same value as for holder A Height clamps: The same value as for holder A Clamp width: The same value as for holder A Thickness: The same value as for holder A Width of the next holder: The same value as the width of holder B (must be smaller than the width of holder A!) This screenshot shows the rectangular model. But it works in the same way! You can also see the connector part on the last picture of the gallery. Print settings: You can print it with standard setting (0,2mm layer height, 10% infill). I recommend reducing the speed of the top surface to 50 mm/sec for better print quality. If you have generate the set of both parts you can seperate both parts with rightclick on the part → “Split” →" to objects" if you want print only one of both parts. Holder for rectangle lids with clamp: Link