Mini Gothic Tea Light Lantern

Designer

Maxx_Design

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

mini lantern tea light tealight tea light led holder gothic

Beskrivelse

Boost Me (for free) If you enjoy my designs, you can support my work with a boost! Boost Bring a touch of gothic elegance to your space with these beautifully designed LED lanterns, blending intricate architecture with a warm, modern glow. This lantern fits standard electric tea lights with a diameter of up to 40mm and heights between 17-27mm. No AMS needed for printing. The parts assemble without any additional tools or screws by simply snapping into each other. You can print the lantern with or without a hanger. For the shade you have three options: Meshed Shade (Works with any filament) Solid Shade (Works best with translucent filament) Solid Shade in Vase Mode (depends strongly on the used filament) Disclaimer: This design can only be used with electric tea lights! Printing All parts were designed for 3D-Printing and require no supports. There are self-supported geometries and threads, which require printing at 0.16mm layer height. Assembly Assembly is very easy and requires not additional tools. First secure the tea light with the threaded holder in the base. Now put the shade into the lantern and press it into the foot. This can be a little harder at the first time, but should become easier if you open and close it a few times. Like this design? Check out my Mini Lantern Collection! https://makerworld.com/en/collections/5446140-mini-lanterns Commercial license available on Patreon and MakerWorld Membership Get a commercial license for my designs by becoming an Authorized Seller! Join