Mini Heart Tea Light Lantern

Designer

Maxx_Design

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

heart lantern tealight tea light tea light holder valentines valentines day valentine's day mini

Beskrivelse

Boost Me (for free) If you enjoy my designs, you can support my work with a boost! Boost This heart ornament adds a lovely romantic touch, perfect for Valentine’s Day or as a sweet decoration all year round. Important: Magnets are required for assembly! This lantern fits electric tea lights with a diameter of up to 40mm and a total height (including flame) of up to 58mm. The magnet cap allows quiickly getting the tea light in and out to access it. Print Settings No special settings are required for this print. I slightly increased the strength settings and added manual adaptive layers to some parts to get smooth curves. I also added a small manual support to the bottom piece to help with bridging. Assembly You need D4x2 or D6x3 magnets for assembly. I recommend the D4x2 version, this is the same kind that can be found in the Makers Beginner Kit. If you have good magnets, you will only need two pairs, insert them diagonally as shown in the picture. If you are not happy with the strength, you can add magnets to the remaining holes as well. Because of dimensional tolerances, some magnets might require glue to stay in place. Disclaimer: This design can only be used with electric tea lights! It's not suitable for real candles! If you like this design, check out my Valentine’s Day collection! https://makerworld.com/en/collections/4288260-valentines-day Commercial license available for Supporters on Patreon and MakerWorld! Membership Get a commercial license for my designs by becoming an Authorized Seller! Join