Big Brick Harvester 300 %

Designer

mathiasdela

Designer relation

Followed

Kategori

Toys & Games

Licens

Creative Commons Attribution NonCommercial ShareAlike Creative Commons Attribution-Noncommercial-Share Alike

$ ↺ SA

Attribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

technic tractor harvester 300 giant upscale upscaled brick giantbrick giant brick building buildingtoy building toy toy kids assembly bricks construction big big brick

Beskrivelse

Tractor x Harvester 300% The model is large and requires a fair amount of filament. PLA for everything except TPU for tires. This print uses supports that works great for me. Some of them are pretty hard to remove but should come of easily. Some of them also needs to be rounded (the 43857 and so on) but are no problem doing). With the parts, you can build to different models (see attached) The blue (4 x 4206482-43093-Blue_small - with the little hole in the top) should be used for the pieces showing below. (The lime parts (1 x 6218483-11946-Lime + 1 x 6218484-11947-Lime) and the black parts (4 x 6284699-32013-Black). Tolerances are the reason why. The 7 last blue (7 x 4206482-43093-Blue_large) should be used for the rest. Assembly: Please refer to the assembly guide provided. As a result of printer tolerances and the characteristics of FDM printing, you may occasionally need to exert additional force during assembly. Some parts may fit loosely and may require adhesive to secure them in place, while some parts will benefit from lubrication to ensure smooth operation (PTFE lubricant or silicone oil spray is recommended).