Minimalist Hygrometer Holder (round)

Designer

Kreativ-Zentrum

Designer relation

Followed

Kategori

Tools

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

hygrometer thermometer halter stnder stand minimalist pressfit round fensterbank bad wohnung gadget - home organizer sensorhalter desk stand

Beskrivelse

Minimalist Hygrometer Holder (round) – compact & stable Simple holder for small, round hygrometers/thermometers. Minimal material usage, stable stand – ideal for windowsills, bathrooms, or grow boxes. This holder is deliberately minimalist: an elegantly shaped ring with two small feet ensures a stable stand without obscuring the display. Suitable for common mini hygrometers with round casings. The model is designed for the device to be press-fit in up to 16mm deep. Ring inner diameter: 45 mm (Press-Fit) hygrometer depth 15mm → If your device is slightly different, scale the model in X/Y by ±1–3% or adjust the inner diameter in your CAD. Viewing angle: ~15° for good readability on a table/windowsill Free airflow: open back, sensor not covered Print settings (recommended) Material: PLA for indoor use, PETG/ASA for higher humidity (bathroom/greenhouse) Layer height: 0.20 mm Supports: None Orientation: Flat on the print bed with the feet (ring pointing upwards) Assembly / Usage 1. After printing, remove any strings, deburr the inner ring briefly. 2. Press the hygrometer evenly from the front until it sits flush. 3. Place, done. Adjustments For other diameters, scale only X/Y, leave Z unchanged (stability is maintained). Notes Avoid direct sunlight (falsifies measurement). Use PETG/ASA in very humid environments. Suitable for all round 45 x 14mm (15mm) hygrometers, such as those from the Bambu Lab Store and Amazon https://www.amazon.de/dp/B0DMSV27QK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1