Bambu Tools - Bambu Lab Tool Set LABELED

Designer

K2_Kevin

Designer relation

Followed

Kategori

3D Printer

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

bambu tool set bambu tools disconnect ams power cable disconnect tool hotend ams PTFE bambu p1p bambu x1c cable power connector k2 buffer hub ams buffer ams hub tool toolset h2d h2d dual color print h2d multi-color h2d 2 color labels bambu h2d h2s p2s x1c x1 h2c p1s p2s tools x2d

Beskrivelse

Thank you so much for your Downloads, Like, Boosts! Become a Member at any tier & direct message me with your requests! Don't forget to Follow! Bambu Labs 6 Piece Tool Set w/LABELS H2, X1, P1, P2 & A1's NEW TOOLS! TOOL HOLDERS Included Tools & Hints for Printing: HINT: Having an issue with letters sticking to build plate? If using a smooth plate (recomended for higher quality text) still set slicer to textured for that extra squish. Clean the build plate. Use a very light amount of glue stick or Nano Polymer Be sure you are using my profile or slow down the first layer even more (should not be required) QUALITY HINT: Smooth build plates will resolve better quality text and other fine detailed first layers. PRO TIP: set slicer to textured (even with smooth plates) for that extra squish. AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer & Hub. AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer) AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub) Buffer Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and inside the AMS during PTFE repairs. 2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors. If you want to up your cool game, use 6x2mm Magnets. Pay close attention to the magnets polarity (all should face same direction/polarity). They're designed to fit magnets snugly, but you might need a little glue for some of them. Example usage: Other models waiting to be discovered… Boost Me (for free) Thank you so much for Rating, Following and the BOOSTS! Boost Membership Want to request a model or design change? You’ll need to be a member (any tier works!). Join up and send me a DM — so grateful for your support ❤️ Join