AMS HT - Desiccant Box / Silica Dry Box / Dry Pods

Designer

K2_Kevin

Designer relation

Followed

Kategori

3D Printer

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

ams ht ams ht desiccant box silica dryer drying beads refill dry ams spool holder bambu ams bambu bambu ams ht dry sillica drybox dry pods x2d h2c h2d h2s

Beskrivelse

Thank you so much for your Downloads, Like, Boosts! Become a Member at any tier & direct message me with your requests! Don't forget to Follow! AMS HT Desiccant Box This container is designed to accommodate either your own rechargeable desiccant beads or pre-packaged desiccant packets, offering flexible moisture control options. Instructions for use: After filling, slide on the lid. Remove the rear roller (pull upward) inside the AMS HT. Insert this Desiccant Box (logo facing forward). Re-install the rear roller. AMS 2 PRO Desiccant Box Found Here Why is Desiccant Still Needed in the AMS HT? Desiccant is used in an active filament dryer to absorb moisture from the air surrounding the filament. Here's why this is necessary: Filament is hygroscopic: Most 3D printing filaments (like PLA, ABS, PETG, and especially nylon) absorb moisture from the air. Even small amounts of water can lead to: Poor print quality (stringing, bubbling, inconsistent extrusion) Weakened mechanical properties Clogged nozzles Active drying still requires moisture removal: An active filament dryer typically heats the filament to release absorbed moisture, and the desiccant: Traps that moisture, preventing it from re-entering the air inside the dryer Speeds up drying by maintaining a low-humidity environment Maintains dry storage conditions: Even after drying, the desiccant helps keep the air inside the dryer dry, preserving filament quality until it's used. Important Features: Top loading of desiccant is key! Front loading holders seems risky, if they open and leaks beads in the AMS HT, it could cause some real damage to fans and heater. Printing Notes: If you plan on using the drying feature of the new AMS HT, Print this box in PETG or ABS. Be sure to clean your build plate. FYI: If your printer keeps pausing due to AI detection issue, It's not learning… TURN OFF AI Detection. Installation Notes: Fill the desiccant box with your choice of desiccant beads or just fill with desiccant packets. Use the orange rechargeable desiccant (The blue is known to be toxic) I found this desiccant works great and can be recharged in 6 minutes in your microwave. Slide the lid onto the box (It's a nice tight lid). Remove the rear roller from the AMS HT (Just pop it up) Place box into the rear of your AMS HT with the Bambu logo facing forward (either way will work) NEW TOOLS ALERT! NEW for the H2D H2D Rail Cleaner (H2D, A1, A1mini) H2D PTFE Tube Holder Bambu Toolset H2D Dual Nozzle Calibration Other models waiting to be discovered… Boost Me (for free) Thank you so much for Rating, Following and the BOOSTS! Boost Membership Want to request a model or design change? You’ll need to be a member (any tier works!). Join up and send me a DM — so grateful for your support ❤️ Join