prismal • living room lamp

Designer

h3li0

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

lamp lampshade livingroom decor homedecor modern minimalist pattern design h3li0

Beskrivelse

prismal · living room lamp a sleek, modular lamp designed for ambient lighting in interior spaces this larger design features a minimalist base with an inner white shade and outer shade that mirrors the base colour with elegant vertical patterning. designed for low-heat LED bulbs (max 25w) to ensure optimal performance, longevity and safety. perfect for living rooms, reading nooks, or as a statement piece in modern interiors. also available in this series will be a smaller (and with slightly different proportions) prismal • desk, that will be published in the next couple of days important · make sure that: your filament is dry and calibrated your build plate is properly clean so that there aren't adhesions issues and lifts during the print this design is optimised to print with a 0.8 nozzle, which is highly recommended, it can potentially also be printed with a .6 nozzle (increasing the default layer width), but don't recommend printing with a 0.4 nozzle the shades, as those are designed to be printed in vase mode and require a higher layer width this lamp is provided “as‑is.” users are solely responsible for ensuring that the final build is safe, complies with local electrical codes, and is used in a manner consistent with their own risk tolerance. use this design at your own risk. no liability is accepted for any damage or injury assembly use a E27 light fixture kit and put the socket through the base secure the inner shade to the base using the light socket threaded connector, aligning before a tightening fully add the lamp add the outer shade (it will slide over the inner shade) finally guide the power cord through the cutout slot components dimensions: base ~ x:147 · y:125 · z:75 inner shade ~ x:211 · y:190 · z:137 outer shade ~ x:220 · y:199 · z:139 photos show printed in PETG-HF base settings PETG-HF .80mm nozzle variable layer height 10% adaptive cubic infill no supports shades settings PETG-HF .80mm nozzle spiral vase mode .40mm layer height 1.2mm line width notes includes bambu studio 3mf files and STLs all photos uploaded are of the actual printed model, and are copyright protected if you enjoy this model please consider to buy me a coffee commercial licence membership available on my patreon Boost Me (for free) if you enjoy the design, please consider giving it a boost :) Boost