Print-in-Place Belt with Clamping Buckle

Designer

DjangoCashflow

Designer relation

Followed

Kategori

Fashion

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

belt buckle buckle belt wearable clamp snap felxible closure fashion pratical Hinge printinplace PIP TPU

Beskrivelse

This adjustable belt features a print-in-place buckle and a snap-in clamp to permanently attach the belt to the buckle. The belt comes in lengths from 950 mm to 1200 mm (measured end to end, not standard belt sizes). To find the correct size, take your usual belt length and add at least 50 mm. The extra length is needed to feed the belt through the buckle and allow for adjustment. Assembly is simple: Insert the belt into the buckle Align the holes in the belt with the matching pins on the clamp Press the clamp down into the buckle until it clicks in place The other end of the belt slides into the buckle and is held by a friction-based clamping mechanism, making it easily adjustable when worn. Details: Buckle prints fully assembled (no supports, no post-processing) Clamp presses in to secure belt to buckle Belt is flexible and durable Available with and without front logo Uses approx. 100 g TPU for the belt and 20 g PLA for the buckle Belt print time: ~8 hours