Christmas Ornaments Set

Designer

29flo

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

christmas oranament set snowflake hang tree xmas holiday decor decoration home pattern winter design art detail gift star

Beskrivelse

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Boost Me (for free) If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊 Boost Here is another set of Christmas ornaments, this time designed in the shape of snowflakes. They are very easy to 3D print. For the best results, I recommend printing them vertically with supports. The supports should come off quite easily once the print is finished. Just be sure to remove them gently, as some of the finer details can be delicate. Print Difficulty level: [4/10] [ Suggested Print Setup for 10 cm figurine ] - You can scale it up or down as desired. Nozzle: 0.4mm Layer Height: 0.15-0.2mm ( You can adjust the layer height based on how much detail you want ) Infill: 5% Wall loops: 2 Supports: Tree (auto) Printed with: - PLA Matte Charcoal + Paint (or not) These photos are real and show an actual 3D-printed figure photographed by me. As always! The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.