Halloween Zombie Hand Trick Or Treat Bowl

Designer

Zurlingo3D

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

Halloween spooky hallo ween bowl zombie zombie hand zombie arm trick trick or treat trick or treat 2024 trick or treat bowl zurlingo-3d

Beskrivelse

Halloween Zombie Hand Trick Or Treat Bowl This zombie hand trick or treat bowl will give kids a scare! Fill the bowl with sweets and pivot the zombie hand using the in-built handle, as kids reach in to grab their treat. Features: Print-in-place with no support and a strong hinge design. It can be printed on an A1 Mini or scaled up to suit your bed size if required. The Diameter of the bowl rim is 160mm and has a depth of 70mm. Two Versions Are Included: The hand and bowl are joined together meaning all will be printed in one colour. The hand detaches from the hinge and is printed separately to allow for easy multi-colour with no AMS. *Raw STL files also included* Assembly Of Multi-Colour Bowl: The hinged part has a hexagon shaped peg to help with easy alignment. There is a hexagon shaped hole in the base of the hand. Check fitment by push fitting the hand onto the peg (This may stay in place with no glue depending on different filament tolerances) For a permanent fix, simply add a spot of superglue to the peg and surrounding base, and press the hand in place. Be careful when applying pressure to the hand as the fingers can snap. Try and hold the palm section of the hand whilst fitting over the peg. You can also paint some blood streaks on the hand within Bambu Studio if you don't mind increasing the print time and filament waste. Boost Me (for free) If you like this design, please consider giving it a boost :) Every single boost is very much appreciated :D Thank You. Boost Thanks for looking! Please rate and review your printing experience :)